Sansui AU-20000

Power Output:

Min. RMS, both channels driven, from 20 to 20,000Hz, with no more than 0.05% total harmonic distortion

170 watts per channel into 8 ohms

170 watts per channel into 4 ohms

85 watts per channel into 16 ohms

Load Impedance: 4, 8, 16 ohms

Power Bandwidth: 20 to 20,000Hz at or below rated min. RMS power output andvtotal harmonic distortion

Total Harmonic Distortion: less than 0.05% at or below rated min. RMS power output

Intermodulation Distortion (70 Hz: 7 kHz = 4:1 SMPTE method): less than 0.05%

Frequency Responce (at 1 watt): 10 to 50,000Hz

Damping Factor: approximately 80 at 8 ohms load

Input Sensitivity and Impedance (1 kHz for rated power output):

Phono 1: 1.5, 3, 6 mV/ 30, 50, 100 kohms

Phono 2: 1.5, 3, 6 mV/ 50 kohms

(Max. input capability: 800 mV at 1 kHz, less than 0.1% total harmonic distortion and Sensitivity switch at 6mV)

Tuner: 130 mV/50 kohms

Aux: 130 mV/50 kohms

Tape 1, 2 Play (pin jacks): 130 mV/50 kohms

Tape 2, Rec/Play (DIN socket): 130mV

Main In: 700 mV/50 kohms

Output Level (1,000Hz)

Tape 1, 2, 3 Rec (pin jacks): 130mV

Tape 2, Rec/Play (DIN socket): 30 mV

Pre Out: 700 mV

Channel Separation (1 kHz, at rated power output)

Phono 1, 2: better than 55dB

Tuner: better than 60dB

Aux: better than 60dB

Tape 1, 2, 3 Play: better than 60dB

Main In: better than 65dB

Hum and Noise (IHF)

Phono 1, 2: better than 70dB

Tuner: better than 80dB

Aux: better than 80dB

Tape 1, 2, 3 Play: better than 80dB

Main In better than 1OOdB

Controls

Bass: ±10dB (30Hz)

Midrange: ±5dB (1 kHz)

Treble: ±10dB (20kHz)

Low Filter: -3dB (20, 40 Hz), 12dB/oct.

High Filter: -3dB (7 kHz), 6dB/oct.; -3dB (12kHz), 12dB/oct.

Muting: 0, -10, -30dB

Power Voltage: 220/240V 50/60Hz

Power Consumption: 360 watts (rated); 1,110 watts (max.)

Dimensions: 460x178x400 mm

Weight: 23.6 kg