Eumig FL-1000µP

Signal to noise ratio:

Without Dolby

Ferric tape: 57 dB

Chromium tape: 59 dB

Metal particle tape: 62 dB

With Dolby

Ferric tape: 65 dB

Chromium tape: 67 dB

Metal particle tape: 70 dB

With HighCom

Ferric tape: 75 dB

Chromium tape: 76 dB

Metal particle tape: 78 dB

Noise reduction system:

DOLBY NR or Telefunken HighCom with -9 dB position for playback of Dolbyised cassettes

Rewind time for C-60: Less Than 35 seconds (variable speed for fast forward and rewind)

Tape adjustment:

Computest® with microprocessor controlled bias fine adjustment and DOLBY calibration*) for each of the three types of tape

Level indication: Fluorescent peak level indicator with 2x14 segments, measuring range -20 to + 8 dB, with peak hold, dimmer, -6 dB switch for metal particle top and limiter with LED indication

Courier: A digit, electronic, with microprocessor control, location of any random tape position, memory

Automatic functions: Counter reset when open, cassette lid, Rewind and reset when inserting a cassette, Continuous operation, Recording via external

Inputs:

Line 1: 100mV/100 kOhrr,

Line 2: 100 mV/100kOhm microphone near 2 mV, microphone distant 0,2 mv/, suitable for low to medium impedance microphones

DIN: 1 mV/kOhm Earphones 8-2000 Ohms Inputs mixable with masva/ level control and fader ard cordless reverb automatic

Outputs:

Line fix: 775 mV/0dS/100 Ohm

Line variable: 0-775 mV/0dB/100 Ohm DIN: 775 mV/0 dB/500 Ohm

Dimensions: 455(W)x330(D)x177(H) mm

Weight: 12kg

Power consumption: 50W